Workshop «Shaft alignment and dynamic balancing»
We invite technical specialists to participate in the training course on the topic «Shaft alignment and dynamic balancing» which will take place on 12-13 September, 2019 in Germany (Lubeck). The workshop is arranged for specialists in quality, service engineers, mechanics and power engineers who are responsible for the reliability of machines and industrial equipment.

Kronsforder Allee 45,
23560 Lübeck
Tel: +49 (0) 451-370-87-700
Products -- Balancing


Balancing is a process of determining values and angles of rotor unbalance and reducing this unbalance by means of mass correction (for example, shaft balancing).

The dynamic balancing is one of the main stages during technical maintenance and repair of fans, electric motors, pumps, gearboxes, compressors, turbine unit, etc. New shafts and repaired equipment should be always balanced.

The dynamic balancing allows to reduce a vibration level up to the tolerance values, which provides production safety, increases machine working life, reduces energy consumption and decreases probability of emergency failures and shutdowns.

When designing machines engineers try to reduce harmful vibrations by selecting optimal design and manufacturing technologies. But during manufacturing and operation rotating parts suffer unbalance. To reduce the unbalance of the rotating parts they need to be balanced by changing their mass and geometry (static and dynamic shaft balancing) during their manufacturing, repair and operation. Thus, all cylindrical or symmetrical parts (shafts) must be balanced.

The proper shaft balancing extends service life of impellers and wheels by 23%-100% and increases available capacity of wheels by 10%-25%. The balancing 4 times reduces a surface waviness and 3 times increases performance of diamond wheels.

The shaft balancing should be performed for all the cylindrical and symmetrical about the axis rotation parts and rotors. BALTECH produces the balancing device BALTECH VP-3470 to perform the dynamic balancing of rotors in their own bearings. The BALTECH Balance balancing software allows to perform a multiple plane balancing.

Back      Main