Workshop «Shaft alignment and dynamic balancing»
We invite technical specialists to participate in the training course on the topic «Shaft alignment and dynamic balancing» which will take place on 12-13 September, 2019 in Germany (Lubeck). The workshop is arranged for specialists in quality, service engineers, mechanics and power engineers who are responsible for the reliability of machines and industrial equipment.

Kronsforder Allee 45,
23560 Lübeck
Tel: +49 (0) 451-370-87-700
Products -- Tool kit -- Induction heaters -- BALTECH HI-1630


  • Machine tools, BALTECH HI-1630, coupling replacement, installation of gear drives, tools for bearing mounting
  • BALTECH HI-1630, induction heater for couplings, induction heating of gears
  • Bearing installation, induction heating BALTECH HI-1630, reliability technologies
  • Bearing installation, induction heater, BALTECH HI-1630, heater selection diagram

BALTECH HI-1630 is a small- size, lightweight, high-performance and cost-effective induction heater with an electronic control. The induction heating can be conducted horizontally and vertically. The heater has the function of automatic demagnetization of bearings upon reaching a defined temperature. The induction heater is intended to heat parts weighting 25-55 kg with a maximum outer diameter 480 mm.

For fast and reliable bearing assembling it is necessary to heat an inner ring. Remember, that a closed bearing with oil should not be heated because the oil will flow out and the bearing will go dry. The bearing assembling with the induction heater BALTECH HI-1630 is controlled by a microprocessor and temperature sensor.

Technical characteristics
Model BALTECH HI-1630
Nominal power , kVA 3,6
Voltage , V/Current,А 220/16
Frequency, Hz 50
Rotatable yoke Yes
Heated part
Maximum bearing weight, kg 55
Minimum inner diameter d, mm 20
Maximum outer diameter D, mm 480
W, mm 120
H, mm 155
Yoke dimensions
Yoke width, mm 14;20;30;45
Yoke length, mm 250
Control panel
Temperature setting, °С
Maximum temperature, °С
Automatic power reduction Yes
Dimensions, mm 470х210х260
Heater weight (without yoke), kg 25

Back      Main