Workshop «Shaft alignment and dynamic balancing»
We invite technical specialists to participate in the training course on the topic «Shaft alignment and dynamic balancing» which will take place on 12-13 September, 2019 in Germany (Lubeck). The workshop is arranged for specialists in quality, service engineers, mechanics and power engineers who are responsible for the reliability of machines and industrial equipment.

Kronsforder Allee 45,
23560 Lübeck
Tel: +49 (0) 451-370-87-700
Products -- Balancing -- BALTECH VP-3470


  • repair of fans, fan balancing, BALTECH VP
  • BALTECH VP-3470, dynamic balancing of fans
  • vibration analysis and adjustment of the equipment
  • BALTECH VP-3470, balancing solutions

BALTECH VP-3470 allows to perform a dynamic balancing of rotors in their own bearings at the operating speed. The main reason of the elevated vibration is an unbalance, which leads to bearing heat and destruction. BALTECH has developed BALTECH VP-3470 for the dynamic balancing of fans, exhausters and electric motors.

The dynamic balancing is performed based on 3 planes and 8 control points. The balancing procedure includes three stages: measurement of an initial vibration and phase, test run, calculation and installation of balancing masses, check run. A built-in vector calculator allows to carry out addition or subtraction of vectors if the calculated mass can't be mounted on the calculated location. BALTECH VP-3470 makes it possible to perform a harmonic vibration analysis to detect a reason of the elevated vibration. Balancing protocols are stored in the device memory and can be transferred to the BALTECH Expertsoftware

Features of BALTECH VP-3470:

  • Vibration meter mode: measurement of the overall vibration (vibration velocity, vibration acceleration, vibration displacement, RMS, Peak, excess)
  • Phase meter mode
  • Tachometer mode
  • Multiple plane balancing with BALTECH Balance the balancing software (test run, mode- dynamic influence coefficient)
  • Test mass calculation
  • Calculation of a test mass and angle of the balancing mass location
  • Stroboscope connection
  • Waveform measurement (oscillograph mode)
  • Spectral analysis (vibration velocity, vibration acceleration, vibration displacement)
  • Time domain and spectral analysis of high- frequency envelope
  • BALTECH VP-3470 allows to transfer the measurement data to the software BALTECH Expert for database management, data analysis, prediction, diagnostics and report creation.

Technical characteristics
Number of channels 2 analog channels 1 synchronizing channel
Inputs ICP accelerometer (two channels), speed sensor (one channel)
Transducer type Accelerometer, speed sensor, stroboscope
Integration Digital
Frequency range, Hz 0.5 - 10000
Maximum bandpass flatness% ± 5
Vibration parameters
Measured parameters Vibration acceleration , vibration velocity, vibration displacement
Detector RMS, Peak, Peak-Peak, Peak- factor, excess
Number of averages 1-100
Vibration measurement bands, Hz
Standard 2…200, 2…1000, 10…1000, 10…2000
Additional: 10…10000
Measurement ranges
Vibration acceleration, m/s2 0.05…300
Vibration velocity, mm/s 0.05…1000
Vibration displacement, um 0.05…10000
Spectral analysis
Boundary frequencies, Hz 200, 500, 1000, 2000, 5000, 10000
Number of lines 400, 800, 1600
Windows Rectangular, Hanning, Blackman-Hamming
Dynamic range, dB Not worse than 75
Envelope detector with band-pass filters
2/3 octave, Hz 4000, 5000, 6300, 8000
1/3 octave, Hz 4000, 5000, 6300, 8000
1/1 octave, Hz 4000, 5000, 6300, 8000
Vibration and phase measurement
Rotation frequency range, Hz 0.5...2000
Frequency error, % +/- 1
Phase error, angle +/- 5
Amplitude error, dB +/- 1
Automatic control Sensor connection control
Amplitude measurement unit dB, g, m/s2, mm/s, um
General characteristics
Display LCD
Display size 3.5"
Resolution, pixels 320x240
Memory, MB 8
Keyboard Film
Interface USB
Battery charge indicator

Discharged/ Charged
Safety class IP 65
Weight of the display unit, kg 1.00 ±0.01
Dimensions (length x width x height), mm 190x140x35
Weight in the carrying case, kg 7.00±0.5
Dimensions in the carrying case, mm 470x140x380
AC supply voltage, V / Hz 220±22 / 50
Power supply, V / mAh 3.3 / 2000
Battery charging time, hour ˜ 4
Battery working time, hour ≥8

Back      Main