Workshop «Shaft alignment and dynamic balancing»
We invite technical specialists to participate in the training course on the topic «Shaft alignment and dynamic balancing» which will take place on 12-13 September, 2019 in Germany (Lubeck). The workshop is arranged for specialists in quality, service engineers, mechanics and power engineers who are responsible for the reliability of machines and industrial equipment.

Kronsforder Allee 45,
23560 Lübeck
Tel: +49 (0) 451-370-87-700
Articles -- Oher

Fan maintenance

There is ventilation equipment at all the industrial factories. The ventilation equipment is a rotor equipment. This equipment falls under the critical, incidental and auxiliary equipment. From the above it follows that the service maintenance is one of the most important factors, ensuring the trouble-free operation of the ventilation equipment (fans, blowers, etc.).

To provide the maintenance of the fans, many factories establish special maintenance areas, for example, “area of ventilation equipment service maintenance” or engage some outside organization to perform the appropriate works to ensure faultless operation of the ventilation equipment at their factory.

To set up the maintenance area it is necessary to purchase special equipment and hire specialists in alignment, balancing, vibration diagnostics, thermography and oil analysis. In any case you will need specialists who can perform bearing mounting and dismounting. Therefore the maintenance area should be equipped with the appropriate equipment to carry out the above - mentioned works. BALTECH has been working for many years on the industrial market and our specialists of the technical service department can conduct a primary technical audit of the ventilation equipment at your factory, estimate the equipment criticality, perform service works or assist in selecting proper devices and systems for qualitative maintenance of fans (exhausters), blowers and other ventilation equipment. Also Baltech arranges training of specialists of industrial enterprises in almost all the fields relating to fan maintenance. We recommend you to take part in our training seminars Reliability technologies that we arrange in our office in Lubeck.

It is necessary to understand that such maintenance area at your factory allow you to perform the required periodical vibration monitoring of the equipment, to make right decisions on eliminating the detected defects by conducting alignment, unbalance correction, bearing replacement, etc. As a consequence the establishment of the fan maintenance department makes it possible to avoid unscheduled shutdowns of units and thus enhance the quality and efficiency of the ventilation systems.